Waste Oil Furnaces

CE-330 heats aprox. 9,000 sq. ft.

 

CEHS.logo.tag.USESMALL.png

The CleanEnergy CE-330 our largest industrial-duty waste-oil furnace, and it is perfect for quickly and effectively heating a garage with 7 or more bays.

 
 
 
 
  • Model Specs
  • Features
Swipe Left for additional information

 

  • BTU / Hour Input: 325,000
  • 3,700/85°F, air flow output CFM/heat rise
  • Fuel consumption: 2.3 GPM
  • Acceptable fuels include used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
  • Electrical: 230 VAC, Single Phase, 30 Amp Breaker
  • High velocity air swept heat exchanger
  • Vertical stainless steel flue tubes
  • 8" Chimney outlet on left or right side
  • Tank, wall or ceiling mountable
  • 1,000 plus hour cleaning interval
  • Digital wall thermostat
  • 14,000 volt burner with interrupted duty ignition
  • Dimensions L x H x W: 111" x 32" x 26"
  • Safety: UL and ULC Listed
  • Made in the USA 
  • Limited Lifetime Warranty

 

Also Included with Furnace

 

  • Heat exchanger
  • Pre-assembled, vacuum tested metering pump
  • CleanEnergy Burner
  • In-line, washable oil filter with gauge
  • Digital wall thermostat
  • Foot valve
  • Barametric damper
  • Oil line Fittings
  • Industries Best Warranty
  • 409 Stainless Steel Heat Exchanger and 409 Stainless Steel Flue Tubes for Durability & Corrosion Resistance increases the life of the furnace.
  • Heat exchanger and flue tubes are designed to limit heat escape and maximize the heat produced.
  • Flue tubes are swedged, not welded, to resist cracking over years of heavy use.
  • Vertical heat exchanger flue tubes for Longer Service Intervals (1,000+ hours)
  • Over center latches on doors for Easy, Quick Cleaning
  • Digital, programmable burner control for reliable operation in all conditions
  • High velocity air swept stainless steel heat exchanger Produces More Heat
  • Thermostatically-controlled pre-heater easily pass UL "cold oil start" tests
  • Burns a variety of fuels including most synthetic oil, and just about any mixture of oil products
  • Dependable, Easy to Install Metering Pump. Pre-assembled and vacuum-tested - automatically adjusts for different fuels
  • Quick, Easy Access Oil Line Connection Block - allows easy access without disconnecting oil line.
  • Modern Burner manufactured by CleanEnergy preheats oil, regulates and optimizes combustion
  • Tank, Wall or ceiling mounting options.